Table of Contents
Advertisement
Facilitate the circulation of incoming air through the vents and through the lower
pit, if present, and also the outgoing air through the upper vents.
Avoid corrosive enviroments.
Due to its considerable weight, the equipment needs to be positioned on a firm and
completely horizontal floor.
If the equipment is seated over a pit to house the cabling conduits, then the equipment
base must rest on the largest possible area of firm flooring without creating any mechanical
stress in the equipment structure.
The inverter should be located in an environment with an ambient temperature of
between -10 to 45ºC.
The equipment is designed for maximum performance in these temperature conditions.
At higher temperatures the equipment will limit its power output.
During operation, the inverter will make a slight buzzing noise.
Do not locate the inverter in an occupied room or on supports that could amplify
this buzzing noise.
Install the equipment in a place that is easily accessible for installation and
maintenance work and which offers sufficient space for personnel to operate the
keypad, read the display and access the inverter interior.
Anchoring
Ingecon
This system consist on metal plates that are screwed to the four corners of the plinth
and to the concrete slab where the inverter is located.
In following picture, shape and way of installation of this plates in the enclosures of 10
to 15 kW.
Pg. 10 de 40
Sun Three-phase inverters can be equipped with an optional sujection system.
®
Installation Manual
Ingecon® Sun Three-Phase Inverter
Ref.: AAS2000IKI02
Rev.:_
Dec-2009
Advertisement
Table of Contents
