Table of Contents
Advertisement
Installation Manual
Ingecon® Sun Three-Phase Inverter
7.6
AJUSTMENTS
Date and Date
The current time and date can be changed from this menu. The internal clock automatically
makes the time change from summer / winter.
Change Inverter Number
In this menu is assigned the number of the inverter in the installation. It's neccessary to configure
the communications.
Language
Here you can select the language of the display.
Grid Quality
Grid Quality parameters can be changed here. Security Code will be neccessary.
Grounding
PV array grounding type can be modificated here. Security Code will be neccessary.
Connexion Tipe
The time that waits the inverter to connect to the grid can be modified here.Security Code will
be neccessary.
Total Reset
This option resets all partial counters. Security Code will be neccessary..
7.7
INVERTER DATA
Inverter data are shown in this screen:
12:00
INVERTER DATA
NS:
Firm:
FirmDis:
BootDis:
Serial Number (SN)
Number that identifies the inverter.
Firmware Version (Firm)
Name and Version of the Firmware of the inverter.
Display Firmware Version (FirmDis)
Name and Version of the Firmware of the display.
Displayl Boot Version (BootDis)
Name and Version of display's Boot.
Ref.: AAS2000IKI02
Rev.:_
Dec-2009
09/01/09
011090102R34
AAS1040_P
AAS1091_
AAS1092_
Pg. 31 de 40
Advertisement
Table of Contents
