Change The Offset With Follow The Contour; Reverse Direction With Follow The Contour - MINN KOTA i-Pilot Link Owner's Manual

WORKING WITH FOLLOW THE CONTOUR

Change the Offset with Follow the Contour

1
a. When Follow the Contour is engaged, scroll through
the Content Area using either your finger or the
Screen Navigation
Contour Active Band.
b. Select the Follow the Contour Active Band using your
finger or by pressing the Ok
c. In the Follow the Contour Control Screen, find the
Add 1 button or Minus 1
Add 1
the button to move the Offset in the corresponding
direction.
NOTICE:
When setting the Offset, the Add 1
button will move the boat to navigate to deeper
water, the Minus 1
shallower water.
d. Once the desired Offset is found, press the Back
button or the Home

Reverse Direction with Follow the Contour

1
a. When Follow the Contour is engaged, scroll through
the Content Area using either your finger or the
Screen Navigation
Contour Active Band.
b. Select the Follow the Contour Active Band using your
finger or by pressing the Ok
c. Select the Reverse
the Contour Control Screen using your finger or by
scrolling to it with the Screen Navigation
and pressing the Ok
©2019 Johnson Outdoors Marine Electronics, Inc.
button to find the Follow the
button.
button. Select
Minus 1 Add 1 Minus 1
button will move the boat to
Add 1 Minus 1
button to exit the menu.
button to find the Follow the
button.
button from the Follow
Reverse
button to select it.
1a
Add 1 Minus 1
NOTICE:
Back Home
Follow the Contour.
1a
button
FOLLOW THE CONTOUR
2e 1d
1c
Cruise Control can be used while navigating with
2e 1d
1c
minnkotamotors.com | 53