Follow The Contour; Understanding Follow The Contour - MINN KOTA i-Pilot Link Owner's Manual

fOllOW THe CONTOUR

UNDERSTANDING FOLLOW THE CONTOUR

Follow the Contour allows you to navigate a contour on a
Humminbird LakeMaster chart or AutoChart ZeroLine chart. When
starting i-Pilot Link navigation to Follow the Contour, all other
types of navigation are stopped on the Fishfinder and the Ethernet
network. The boat can navigate either clockwise or
counterclockwise around the contour. The Offset from the contour
can range from -300 to +300 feet. Follow the Contour cannot be activated from the i-Pilot Link remote, but the direction of travel,
offset, and the function can be disengaged using the i-Pilot Link remote. See the Humminbird manual to learn more about Follow the
Contour. If using an AutoChart ZeroLine Map Card, see the AutoChart ZeroLine Map Card Accessory Manual for more information.
Watch for a turning propeller when working with Follow the Contour. Auto Prop On is set to "off" by default. If Auto Prop On is turned
"on", the propeller will automatically turn on when Follow the Contour is engaged, even if the engagement is accidental. A turning
propeller can cause injury. If Auto Prop On is turned "off" the prop must be enabled before the boat will begin navigating with Follow
the Contour.
Humminbird LakeMaster
or AutoChart SD card
required.
52 | minnkotamotors.com
WARNING
20
18
Contour
Lines
Contour selected
from Humminbird to
navigate
Follow the Contour
Active Band that
appears after being
initiated on the
Humminbird.
NOTICE:
Follow the Contour is an i-Pilot Link feature
that can only be initiated from the Humminbird. i-Pilot
compatible Humminbird LakeMaster or AutoChart SD
card required.
20
22
Offset
Contour can be
navigated in both
directions.
22
22
18 Contour can be
navigated in both
directions.
18
Offset
18
20
18
©2019 Johnson Outdoors Marine Electronics, Inc.