MINN KOTA i-Pilot Link Owner's Manual page 16

DISPLAY SCREEN
TALON MENU BUTTONS
Up
Retracts the active Talon(s). Will be replaced by
Pause as the action is taking place.
Down
Used to deploy the anchor. Must be double-pressed
to engage.
Pause
When pressed, it interrupts the current action.
The Talon(s) will remain at the current depth until
another command is sent. The action for both
deploying and retracting the anchor can be paused.
The pause button may appear in place of the Up or
Down buttons, during deploying or retracting and
will disappear when pressed while the unit
is paused.
Anchor Mode
Select the Anchoring Mode between Standard
Mode, Soft Bottom or Rough Water. The
appearance of the button and the icon in the
Talon Dashboard will change depending on the
Mode selected.
16 | minnkotamotors.com
i-Pilot
Select to return to the i-Pilot Link Menu.
Active Talon
Allows the user to selects the active Talon and can
be set to either, left, right or both. The appearance
of the button and the icon in the Talon Dashboard
will change depending on the Talon selected and
the condition of how many Talons are paired to
the system.
Talon Work Light
Press to gain access to the Work Light
options including selecting the Work Light color
and intensity.
Talon Options Menu
Press to open the Talon Options Menu.
Talon System Menu
Press to open the Talon System Menu.
NOTICE:
The buttons in the Talon Menu may become
inactive if the Talon is not connected or communication
with the i-Pilot Link System.
©2019 Johnson Outdoors Marine Electronics, Inc.