Disengage Go To Waypoint - MINN KOTA i-Pilot Link Owner's Manual

2
e. A list of Waypoints that are within a quarter mile will
appear. Scroll through the list of Waypoints to find a
Waypoint to navigate to and select it.
f. The Waypoint Active Band will appear in the Content
Area. The appearance of the Active Band will vary
depending on the distance between the current
location and the selected Waypoint.
NOTICE:
If the Prop is not turning, be sure to
press the Prop Button
behavior for Go To Waypoint can be changed with
the Prop Auto On setting. Read "To Toggle the
Prop Auto On" section of this manual for
more information.
NOTICE:
You are able to select an Arrival Mode
for Go To Waypoint be selecting the Waypoint Active
Band. See the "Change the Arrival Mode" section of
this manual for more information.

Disengage Go To Waypoint

1
a. When Go To Waypoint is engaged, scroll through
the Content Area using either your finger or the
Screen Navigation
Active Band.
b. Select the Waypoint Active Band using your finger or
by pressing the Ok
c. Select the Cancel
Control Screen using your finger or by scrolling to it
with the Screen Navigation
the Ok button to select it.
NOTICE:
Pressing the Prop
controlling the speed or steering with the Remote or
Foot Pedal will also disengage Go To Spot-Lock.
©2019 Johnson Outdoors Marine Electronics, Inc.
to enable it. The Prop
button to find the Waypoint
button.
button from the Waypoint
Cancel
button and pressing
button, or manually
2e
NOTICE:
You have full control over motor speed while
navigating to a Waypoint.
1a
WAYPOINTS
2e 1d
2f
2e 1d
1c
minnkotamotors.com | 35