Tektronix SPG8000 Technical Reference page 49

SPG8000 Specifications and Performance Verification
PAL functional genlock and timing.
13. Set the BLACK 1 output of the reference GPS7 to PAL as follows:
a. Press the down (▼) arrow button until SELECT OUTPUT appears in
the menu.
b. Press the left (◄) or right (►) arrow until BLACK 1 appears in the menu,
and press the ENTER button.
c. You should see SELECT FORMAT in the menu. If you do not, press the
down (▼) arrow button until it appears.
d. Press the right (►) arrow until PAL appears in the menu, and then press
the ENTER button.
e. Press the right (►) arrow until Black Burst appears in the menu, and then
press the ENTER button.
f. Press the BACK button twice to exit the menu.
14. Set the reference format of the SPG8000 under test to PAL Burst as follows:
a. Press the REF button. You should see REFERENCE: SOURCE.
b. Press the right (►) arrow button until you see PAL Burst in the menu,
and then press the ENTER button.
15. Set the BLACK 1 output of the SPG8000 under test to PAL as follows:
a. Press the BLACK button. You should see BLACK 1 : FORMAT on
the menu display.
b. Press the right (►) arrow button until you see PAL in the menu, and then
press the ENTER button.
Performance verification
35