Tektronix SPG8000 Technical Reference page 34
Master sync / clock reference generator
Hide thumbs
Also See for SPG8000:
- Technical reference (195 pages) ,
- Service manual (138 pages) ,
- Quick start user manual (110 pages)
Table of Contents
Advertisement
Performance verification
Load the factory preset
20
Rebooting in Factory Mode. Use these steps to reboot the SPG8000 in factory
mode, without removing power to the instrument:
1. Press and hold the STATUS, ENTER, and Front Panel ENABLE buttons
simultaneously.
2. Continue holding the buttons until the message SPG8000 Booting... displays.
3. When the message SPG8000 Booting... displays, release the STATUS and
ENTER buttons. Continue holding the Front Panel ENABLE button.
4. When the message SPG8000 Start up with Factory Mode displays, release
the Front Panel ENABLE button.
1. Load the factory preset:
a. Press the SYSTEM button to select SYSTEM : PRESET.
b. Press the ENTER button to view the SYSTEM : PRESET : RECALL
menu.
c. Press the left (◄) arrow button to select Factory Default.
d. Press the ENTER button to load the preset.
2. Press the BACK button to exit the Recall menu.
SPG8000 Specifications and Performance Verification
Advertisement
Table of Contents
