Operation; Operating Elements; Operating Keys - Samson TROVIS 5500 Operating Instructions Manual

1

Operation

The application software is ready for operation with the default temperature and time schedule
settings after it has been transferred to the TROVIS 5571 PLC.
On start-up, the language as well as the current time and date must be set in the controller. Re-
fer to section 1.6.
1.1

Operating elements

1.1.1 Operating keys

The keys are located in the front panel of the PLC and protected by a Plexiglas door.
Changeover key
(press with pen or other pointed item)
Switch between the operating level and settings level
Reset key
(press with pen or other pointed item)
Resets the PLC.
NOTICE The application in the controller is deleted.
Cursor key(s)
– Navigate within levels
– Change values
Enter key
– Open levels
– Activate editing mode for parameters and function blocks
– Confirm entered settings
Operation
5
EB 5571-2 EN