Hardware Installation; Msm765Zl Overview - HP ProCurve MSM765zl Installation And Getting Started Manual

Hardware Installation

N o t e

MSM765zl Overview

The HP ProCurve Networking MSM765zl Mobility Controller is a Services zl
Module-based WLAN controller. It plugs in to either the 5400zl or 8212zl
switches. The MSM765zl Mobility Controller is referred to in this document
as the MSM765zl. New switches need to be prepared according to their
supplied documentation.
A maximum of four MSM765zls can be installed in the same chassis. Under
certain conditions, a maximum of three MSM765zls are supported in the 5406zl
chassis. See "Environmental Specifications" on page
MSM765zl Locator LED
Module Status LED
Figure 1. Front panel of the MSM765zl
See also "Front Panel Port and LEDs" on page
This manual contains the basic information needed to get you started using
the MSM765zl. It also contains EMC Regulatory Statements (Appendix A) and
Waste Electrical and Electronic Equipment (WEEE) Statements (Appendix
B). Appendix C provides hardware component information.
For more information on working with the MSM765zl, see the MSM7xx
Controllers Management and Configuration Guide. The latest version of this
and all HP ProCurve Networking documentation is available at:
www.procurve.com/customercare/support/manuals/index.htm.
HDD and Network
activity LEDs
HDD and CF Status LEDs
C-1.
1
1-5.
USB port
1-1