Display Controller - Emerson Rosemount CT5100 Reference Manual

Reference Manual
00809-0100-4512
Figure 6-3: Display Controller
The purge control panel
air system that prevents flammable and explosive gases from entering the analyzer's
electrical compartment. Adjustment of the overpressure air system must only be
performed by maintenance personnel.
Five LEDs, identified as K1, K2, PSV, Bypass, and PT100, are located on the upper part of
the purge control panel. These five LEDs indicate the status of the overpressure air system.
Figure 6-4: Purge Control Panel
6.2

Display controller

Operation of the Rosemount CT5100(Ex) is controlled through the six buttons on the
display controller:
The LCD display (A) can be used to display:
Reference Manual
(Figure 6-4) is used to program the operation of the overpressure
Figure 6-5.
Controls and display controller
October 2019
69