Mounting The Analyzer - Emerson Rosemount CT5100 Reference Manual

Install
October 2019
CAUTION
SHOCK AND VIBRATION
The analyzer contains sensitive electronic equipment. It MUST NOT be subjected to any
shock and or vibration.
Damage to the analyzer may result from a failure to follow this caution.
Procedure
1. On receipt of goods, look for any visible damage to the analyzer and verify that all
2. Visually inspect the exterior of the analyzer for signs of damage, corrosion, gas
3. Report anything found to the maintenance organization.
4. Attach suitably rated and tested lifting slings to the safety engineered lifting eye
5. One person should carefully guide the equipment from the horizontal to vertical
6. Use safety approved and tested lifting equipment to remove the analyzer from the
7. Ensure that the analyzer is stored in its protective plastic cover until installation.
5.3

Mounting the analyzer

This procedure requires two people to safely move and mount the Rosemount
CT5100(Ex).
Procedure
1. Ensure that there is free space around the analyzer to allow ventilation of the upper
50
items noted to be shipped were received. Record on the goods receipt note any
damage or missing items, noting both the item(s) and quantity missing.
leaks, or signs of previously overheating.
bolts mounted on top of the analyzer.
position while the other person lifts the equipment.
shipping container and place it on a solid, level surface.
part of the analyzer.
Reference Manual
00809-0100-4512
Rosemount CT5100(Ex)