Replacing The Tec Board - Emerson Rosemount CT5100 Reference Manual

Reference Manual
00809-0100-4512
12.5

Replacing the TEC board

To replace the TEC board, refer to
Figure 12-4: Replacing the TEC Board
A. TEC board
B. M3 flat washer
C. M3 spring washer
D. M3 x 6 mm socket head cap screw
E. Ribbon cable (to motherboard)
F. Wiring harness (to detector module)
G. Backplate
H. Connector for ribbon cable
Procedure
1. Shut down the analyzer.
2. Open the door of the electrical compartment.
3. Tag or otherwise identify all wiring harnesses before disconnecting.
Reference Manual
Refer to Shutdown procedure.
Figure 12-4 and complete the following steps.
Repair and replacement
October 2019
133