Turning Psv7000 System Power Off - Data I/O PSV7000 Operator's Manual

Operation ■ Finishing a Job

Turning PSV7000 System Power OFF

—72—
When the PSV7000 System will not be run overnight, or before per-
forming a service procedure, turn OFF the power.
1. Finish or end the job if one is running.
2. Remove all devices from the workspace.
CAUTION: Possible damage to programmers and devices! DO
NOT TURN POWER OFF to the programmers or to the
PSV7000 Machine while a job is running. A job must be Finished
before turning programmer power OFF. Wait for the gantry to
park before turning machine power OFF.
3. With Handler PC active (key sequence: scroll-lock > scroll-lock
and number 1):
exit AH700 and TaskLink/LumenX, and TURN OFF THE HAN-
DLER COMPUTER WITH THE WINDOWS Start MENU.
CAUTION: Possible loss of data or difficult restart! DO NOT TURN
PSV7000 POWER OFF before shutting down the Handler PC.
Always make sure the monitor is dark (and not just asleep) and
any optional PCs are shut OFF prior to cutting power to the
PSV7000 Machine.
4. [Laser Marker System only] At the keyboard switch to the
Laser PC (key sequence: scroll-lock > scroll-lock 2).
4a. (Optional) Save and exit the Laser Marker software.
4b. Shut down the Laser PC with the Windows START menu.
Wait until it finishes shutting down—see the message "It's
now safe to shut off the computer."
4c. Turn OFF (0) the Enable Selector (Laser PC).
Data I/O • 096-0461-001G