Preface - Sun Microsystems SPARCserver 1000 System Installation Manual

Using UNIX Commands

Preface

This manual provides installation and removal procedures for the disk drive
unit (two SCSI disk drives attached to the disk drive bracket) for the
SPARCserver™ 1000 system.
This manual does not include specific software commands or procedures.
Instead, it names software tasks and refers you to operating system
documentation or the handbook that was shipped with your new hardware.
The type of information for which you might need to use references includes:
•
Shutting down the system
•
Booting the system
•
Configuring devices
You can find descriptions of commands and procedures in the following
documents:
•
Solaris Handbook for SMCC Peripherals that corresponds to your software
environment
•
On-line AnswerBook™ documentation that comes with the Solaris™ 2.x
software environment
•
Other software documentation that you received with your system
ix