Preparing For Installation; Types Of Disk Drive Units - Sun Microsystems SPARCserver 1000 System Installation Manual

Types of Disk Drive Units

Preparing for Installation

This chapter describes:
•
Which types of disk drive units you can install in your system
•
What tools you need for the installation
•
What safety precautions you must observe
•
How to unpack and inspect the new disk drive unit
•
How to set SCSI addresses on the disk drives
Note – Make sure you perform the tasks described in this chapter before
proceeding with the installation.
The procedures in this manual can be used to install the following:
•
Disk drive unit with two 2.1 Gbyte disk drives
•
Disk drive unit with two 1.05 Gbyte disk drives
Note – Unless otherwise specified, illustrations in this manual show a typical
disk drive unit. Your disk drives may look different.
1
1-1