Hmia; Init-Sys-Fail; Intfail; Ipnotreach - Fujitsu FLM 150 ADM Maintenance And Trouble Clearing

Maintenance and Trouble Clearing
FJTU-320-515-480
3.36

HMIA

Table 3-34: HMIA (Hardware Mismatch Alarm Indication)—Transient Condition
AID
Direction
Type
EQPT NA
3.37

INIT-SYS-FAIL

Table 3-35: INIT-SYS-FAIL (Initialization System Failure)—Transient Condition
AID
Direction
Type
COM NA
3.38

INTFAIL

Table 3-36: INTFAIL (Interconnection Fail)—Alarm Event
AID
Direction
Type
EQPT NA
3.39

IPNOTREACH

Table 3-37: IPNOTREACH (IP = xxx.xxx.xxx.xxx Not Reachable)—Transient Condition
AID Type
COM
Issue 9, May 1999
Probable Cause
Maladjusted to EC1A hardware,
mismatch alarm indication.
Probable Cause
Initialization failure-card removed or failed
Probable Cause
MC1A misconnected or
unit failure
Direction Probable Cause
NA No IP connection to
destination node or
improper IP
provisioning
FNC and FNC Customer Use Only
Suggested Corrective Action
Correct the connection.
Suggested Corrective Action
Replace card.
Suggested Corrective Action
• Correct the connection.
• Replace the MC1A unit.
Suggested Corrective Action
Verify LCN physical connection
from source to destination node.
Verify IP provisioning at destination
node.
3.36: HMIA
Vol. ll, Page 480.3-22