Fujitsu FLM 150 ADM Maintenance And Trouble Clearing page 164

Maintenance and Trouble Clearing
FJTU-320-515-480
5.1.2 Fiber Handling Guidelines
Step 1 Protective caps are provided with the optical cord connectors.(Figure 5-2). When
optical cords are not going to be used for a long time, put the protective caps back
on the optical connectors and seal the cords in a vinyl bag.
PROTECTIVE
CAP
Do not expose the optical cords to direct sunlight. The recommended storage
Step 2
temperature is –10° to +60°C (14° to 140°F), and the maximum recommended
relative humidity is 90 percent.
Never apply excessive force to the connector by pulling, bending, or twisting the
Step 3
cord when the coupling nut is tightened (Figure 5-3).
Issue 9, May 1999
Figure 5-2: Protective Cap
CONNECTOR
TENSILE STRENGTH:
10 kg (22 lbs.) OR LESS
Figure 5-3: Tension Limit
FNC and FNC Customer Use Only
5.1: Handling Fiber Cables
OPTICAL FIBER CORD
TENSILE STRENGTH:
20 kg (44 lbs.) OR LESS
Vol. ll, Page 480.5-2