Fujitsu FLM 150 ADM Maintenance And Trouble Clearing page 165

Maintenance and Trouble Clearing
FJTU-320-515-480
Step 4 Do not pull the cord when the connector is attached to the optical plug-in unit or
optical adapter of the lightwave distribution frame (LDF) (Figure 5-4).
Take precautions not to place sharp bends in the cord. This may occur in
Step 5
attempting to route the cord around an obstruction. Remove the obstruction or
find a different route for the cord (see Figure 5-5).
Figure 5-5: Fiber Cord Bending to Clear an Obstruction
Issue 9, May 1999
Figure 5-4: Fiber Cord Pulling
FNC and FNC Customer Use Only
5.1: Handling Fiber Cables
Vol. ll, Page 480.5-3