Fujitsu FLM 150 ADM Maintenance And Trouble Clearing page 188

Maintenance and Trouble Clearing
FJTU-320-515-480
Step 3 Place the SDCC in service by using the following TL1 command.
For tributary AIDs—
INIT-SDCC:TID:ALL:CTAG;
For high-speed AIDs—
Three-layer protocol:
Seven-layer OSI protocol:
Is the channel in service?
You have completed this procedure.
Issue 9, May 1999
INIT-SDCC:TID:ALL:CTAG;
INIT-OSSI:TID:ALL:CTAG;
If Yes:
FNC and FNC Customer Use Only
5.7: Placing an SDCC In Service
If No:
Call the Fujitsu Technical Assistance Center at
1-800-USE-FTAC (1-800-873-3822) for assistance.
Vol. ll, Page 480.5-26