Fujitsu FLM 150 ADM Maintenance And Trouble Clearing page 181

Maintenance and Trouble Clearing
FJTU-320-515-480
5.5.3 TL1 Procedure
Note: Verify that you receive a completed (COMPLD) response to each command before
going to the next step.
Step 1 Retrieve the T1 or T3 format by using one of the following TL1 commands.
RTRV-T1:TID:AID:CTAG;
RTRV-T3:TID:AID:CTAG;
The FMT keyword and the applicable domain show the framing format. The
possible settings are shown in the following table.
Keyword
FMT
Is the facility provisioned correctly?
Call the Fujitsu Technical Assistance Center at
1-800-USE-FTAC (1-800-873-3822) for assistance.
Issue 9, May 1999
T1 Domain
(Only if Group is configured for D1E)
UNFR (unframed)
SF (superframe)
ESF (extended superframe)
DLC16
If Yes:
FNC and FNC Customer Use Only
5.5: Correcting the T1 or T3 Framing Format
T3 Domain
ASYNC (asynchronous)
UNFR (unframed)
—
—
If No:
Go to Step 2.
Vol. ll, Page 480.5-19