Fujitsu FLM 150 ADM Maintenance And Trouble Clearing page 182

Maintenance and Trouble Clearing
FJTU-320-515-480
Step 2 Edit the T1 or T3 format by using one of the following TL1 commands.
ED-T1:TID:AID:CTAG:::KEYWORD=DOMAIN;
ED-T3:TID:AID:CTAG:::KEYWORD=DOMAIN;
The possible settings are shown in the following table.
Keyword
FMT
Is the framing correct?
You have completed this procedure.
Issue 9, May 1999
T1 Domain
(Only if Group is configured for D1E)
UNFR (unframed)
SF (superframe)
ESF (extended superframe)
DLC16
If Yes:
FNC and FNC Customer Use Only
5.5: Correcting the T1 or T3 Framing Format
T3 Domain
ASYNC (asynchronous)
UNFR (unframed)
If No:
Call the Fujitsu Technical Assistance Center at
1-800-USE-FTAC (1-800-873-3822) for assistance.
—
—
Vol. ll, Page 480.5-20