Removal Of The Paper Take-Up Solenoid - Xerox MF Series Technical Document

(3)

Removal of the Paper Take-Up Solenoid

1. Remove the Left Cover.
☞ E-8
Precautions for Installation of the Paper Take-Up Solenoid
1. Mount the Paper Take-Up Solenoid and tighten one screw.
2. Turn the gear in the direction of the arrow shown below so that the flapper of the Paper
Take-Up Solenoid catches the stopper of the gear.
7. Disconnect one connector and remove the Paper
Empty Sensor.
4136D014AA
2. Disconnect one connector of the Paper Take-Up
Solenoid.
4136D058AA
3. Remove one screw and the Paper Take-Up Sole-
noid.
4136D059AA
Gear
D-6
Flapper
4136D020AC