(4)
Removal of the Power Unit
1. Remove the Fusing Unit.
☞ E-8
(5)
Removal of the High Voltage Unit
1. Remove the Power Unit Assy.
☞ D-3
2. Remove two screws and the Power Switch stay.
3. Remove the Power Switch.
4136D060AA
4. Disconnect one connector from the Controller/
Mechanical Control Board.
5. Remove six screws, disconnect three connectors,
and remove the Power Unit Assy.
4136D001AD
6. Remove four screws and the Power Unit.
4136D002AB
2. Remove one screw and the High Voltage Unit.
4136D003AB
D-3