Xerox MF Series Technical Document page 61

D4
SUBJECT: CPU
Tools
• Hex screwdriver (Torx10).
Preliminary steps
• Disassembly
• Open the control panel by means of tits lever, remove the right cover C (remove the screw A)
• Disconnect the printer cable and CIS motor cable.
• Remove the five mounting screws B and remove the CPU board D.
• Disconnect the printer cable and CIS motor cable.
Assembly
• Unpack and visually inspect the new parts.
• Position the CPU board, screw in and tighten the five mounting screws.
• Reconnect the CIS and control panel flat cables.
• Reconnect the CIS motor and the printer.
• Replace the right cover and close the control panel.
- 13 -
/ C
BOARD OVERS
B
MG 252 787 467 - A
D A
C