Removal Of The Torque Limiter - Xerox MF Series Technical Document

(5)

Removal of the Torque Limiter

1. Remove the Paper take up Clutch Gear.
Torque Limiter
Precautions for Installation of the Torque Limiter
Coupling Gear has five dent for adjustment the Take-up Roller position. When Torque Lim-
iter is replaced, adjust the set position of the Coupling Gear so that the Take-up Roller
becomes level. The procedure is as follow.
12. Remove one screw and the Paper Take-Up Sole-
noid.
4136D018AA
13. Unhook two tabs and remove the Paper Take-Up
Clutch Gear.
4136D057AA
2. Unhook three tabs and take apart the Paper
Take-Up Clutch Gear then, remove the Torque
Coupling
Limiter.
Gear
4136D043AA
D-8
4136D044AA