Standards; Used Standards; Ce Mark; Declaration Of Conformity - Bosch Rexroth IndraControl L25 Instruction Manual

DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
8

Standards

8.1

Used Standards

8.2

CE Mark

8.2.1

Declaration of Conformity

8.3

UL/CSA Certified

Standard
DIN EN 60 204-1
DIN EN 61 131-2
DIN EN 60 529
UL 508
Fig.8-1: Used standards
The electronic products described in these instructions comply with the re‐
quirements and targets of the following EU Directive and with the harmonized
European standards:
EMC Directive 2004/108/EC
The electronic products described in the present instructions are intended for
operation in industrial environments and comply with the following require‐
ments:
Standard Title
DIN EN 61000- Electromagnetic compatibility (EMC)
6-4
Part: 6-4: Generic standards – Emission standard
(VDE 0839-6-4 for industrial environments (IEC 61000-6-4:2006)
)
DIN EN 61000- Electromagnetic compatibility (EMC)
6-2
Part: 6-2: Generic standards – Noise immunity for
(VDE 0839-6-2 industrial environments (IEC 61000-6-2:2005)
)
Fig.8-2: Standards on the electromagnetic compatibility (EMC)
Loss of CE conformity due to changes to the device.
The CE marking is only valid for the device in its delivery status.
After having modified the device, the CE conformity is to be veri‐
fied.
The devices are certified according to
● UL508 (Industrial Control Equipment) and
Bosch Rexroth AG
Description
Electrical equipment of machines
Programmable logic controllers
Equipment and tests requirements
Degrees of protection (including housings and installa‐
tion compartments)
Industrial Control Equipment
19/65
Standards
Issue
September
2007
March 2006