Expanding And Assigning Parameters To The Device; Open The Device - Siemens SIMATIC IPC1047 Operating Instructions Manual

Expanding and assigning parameters to the device

6.1

Open the device.

Risk due to unauthorized opening and improper repairs or expansions
Improper procedures when carrying out expansions may result in damage to equipment or
endanger the user.
If you install or exchange system expansions and damage your device, the warranty
becomes void.
For this reason, please make sure to observe the information in "Notes on ambient and
environmental conditions (Page 26)".
Malfunctions and electric shock
Improper intervention in the device endangers operational reliability and may damage the
device.
The results are personal injuries and damage to the plant.
Take the following precautions:
• Disconnect the power plug before you open the device.
• Close the device after every intervention.
NOTICE
Electrostatic sensitive devices (ESD)
The device contains electronic components that may be destroyed by electrostatic charges.
This can result in malfunctions and damage to the machine or plant.
Take corresponding precautionary measures when you open the device.
Requirement
● The device is fully disconnected from the line voltage, see section "Switching off the
device (Page 39)".
● All connecting cables are unplugged
● The front door is open; see section "Opening the front door (Page 41)".
● Tx10 screwdriver
SIMATIC IPC1047
Operating Instructions, 07/2019, A5E45118479-AB
WARNING
WARNING
6
53