Maintenance Intervals; Removing And Installing Hardware; Remove The Fan Cover - Siemens SIMATIC IPC1047 Operating Instructions Manual

Device maintenance and repair

7.2 Maintenance intervals

Tools
You can make repairs on the device with the following tools:
● Tx10 screwdriver for all of the remaining screws
● Phillips screwdriver
7.2 Maintenance intervals
To maintain high system availability, we recommend the preventative replacement of those
PC components that are subject to wear in accordance with the intervals for replacement
indicated in the table below.
Component
Filter pad
Device fan
Backup battery
7.3

Removing and installing hardware

7.3.1

Remove the fan cover

1. Open the front door until the
marked lock releases the fan
cover, see also section "Opening
the front door (Page 41)".
2. Take hold of the recessed grip.
3. Open the fan cover in the
direction of the arrow.
82
Replacement interval
1 year or earlier depending on the degree of soiling
3 years
5 years
Operating Instructions, 07/2019, A5E45118479-AB
SIMATIC IPC1047