Connecting I/O Devices - Siemens SIMATIC IPC1047 Operating Instructions Manual

Installing and connecting the device
3.3 Connecting the device
3.3.3

Connecting I/O devices

Fault caused by I/O devices
The improper connection of I/O devices can cause faults in the device.
The result may be personal injury and damage to the machine or plant.
Please make sure to observe the information relating to the connection of I/O devices in
section "Notes on ambient and environmental conditions (Page 26)".
Procedure
Note
Use the original connections of the I/O to be connected without adapters or extensions.
1. Connect the I/O devices to the respective interfaces. Information on the position of the
interfaces is available in "Interfaces at rear of the device (Page 15)".
2. Secure the cables with strain relief, if necessary.
36
CAUTION
Operating Instructions, 07/2019, A5E45118479-AB
SIMATIC IPC1047