Siemens SIMATIC IPC1047 Operating Instructions Manual page 60

Expanding and assigning parameters to the device
6.2 Drives
Procedure
1. Press the locks
2. Push the locks to the front in the direction of the arrow.
3. Remove the cover
4. Remove the blanking plates
of the drive cage.
5. Remove all existing removable trays until the drive cage is freely accessible.
60
① ②
of the cover together inside the device and keep them pressed.
②
upwards at an angle at the front of the device.
③
which may be located to the right of the cover at the front
Operating Instructions, 07/2019, A5E45118479-AB
SIMATIC IPC1047