Endress+Hauser Levelflex FMP56 Operating Instructions Manual page 30

Mounting
30
Rod extension/centering HMP40 for FMP57
For FMP57 with rope probes the rod extension/centering HMP 40 is available as an
accessory →  112. It has to be used if otherwise the probe rope comes into contact with
the lower edge of the nozzle.
For FMP57 with rope probes the rod extension/centering HMP 40 is available as an
accessory. It has to be used if otherwise the probe rope comes into contact with the lower
edge of the nozzle.
This accessory consists of the extension rod corresponding to the nozzle height, on
which a centering disk is also mounted if the nozzles are narrow or when working in
bulk solids. This component is delivered separately from the device. Please order the
probe length correspondingly shorter.
Centering disks with small diameters (DN40 and DN50) may only be used if there is
no significant build-up in the nozzle above the disk. The nozzle must not become
clogged by the product.
Levelflex FMP56, FMP57 HART
Endress+Hauser