Endress+Hauser Levelflex FMP56 Operating Instructions Manual page 179

Levelflex FMP56, FMP57 HART
Switch-off delay
Navigation
Prerequisite
Description
User entry
Factory setting
Failure mode
Navigation
Prerequisite
Description
Selection
Factory setting
Additional information
Switch status
Navigation
Description
Invert output signal
Navigation
Description
Selection
Endress+Hauser
 Setup → Advanced setup → Switch output → Switch-off delay
• Switch output function (→  175) = Limit
• Assign limit (→  176) ≠ Off
Defines the delay applied before the output is switched off.
0.0 to 100.0 s
0.0 s
 Setup → Advanced setup → Switch output → Failure mode
Switch output function (→  175) = Limit or Digital Output
Defines the state of the switch output in case of an error.
• Actual status
• Open
• Closed
Open
 Setup → Advanced setup → Switch output → Switch status
Current status of the switch output.
 Setup → Advanced setup → Switch output → Invert output signal
' N o' The switch output behaves as per its parameter setting. ' Y es' The switching behavior is
inverted as compared to its parameter setting.
• No
• Yes
Operating menu



179