Boot Configuration Submenu - Seco SBC Series User Manual

4.3.1 Boot configuration submenu

Menu Item Options
OS Selection Windows / Android
Numlock On / Off
4.3.2 Security configuration (TXE) submenu
Menu Item Options
TXE HMRFP0 Disabled / Enabled
TXE Firmware update Disabled / Enabled
TXE EOP Message Disabled / Enabled
Yes / No
TXE Unconfiguration Perform
Measured boot Disabled / Enabled
4.3.3 Video configuration submenu
Menu Item Options
eDP Disabled / Enabled
HDMI Disabled / Enabled
Mini Display Port Disabled / Enabled
Integrated Graphics Device Disabled / Enabled
Primary Display Auto / IGD / PCIe
RC6(Render Standby) Disabled / Enabled
PAVC
Disabled / LITE Mode /
SBC-A80-eNUC
SBC-A80-eNUC User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G Copyright © 2017 SECO S.r.l.
Description
Configures the BIOS in order to support properly Windows or Android OS.
Allows to choose whether NumLock Key at system boot must be turned On or Off
Description
Enable this option to remove temporarily the flash protection, in order to program the Intel
Enable this option to require a re-flashing of TXE Firmware Image
Send EOP (End of POST) Message before entering OS
Only selectable on CPUs with the TXE feature.
Allows to revert TXE settings to the factory defaults
Enable or disable the measured boot, which provide to antimalware software a trusted log of all boot
components that started before the antimalware software itself.
Description
Enables or disables the eDP video port
Enable / Disable the HDMI video port
Enable / Disable the miniDP video port
Enabled: enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor.
Disabled: always disable IGD. Warning: when the IGD is disabled, there will be no video output at all
(unless there is an external PCIe graphic card selected as Primary Display) and restoring BIOS options to
default values will be possible only by moving blindly in the setup menu.
Select which between IGD or external PCI-e Graphic Controller should be the Primary display
Permits to enable the render standby features, which allows the onboard graphics entering in standby
mode to decrease power consumption
Allows enabling the hardware acceleration of decoding of Protected Audio Video streams.
®
TXE region
43