Acpi Table/Features Submenu - Seco SBC Series User Manual

4.3.4.4 Miscellaneous Configuration submenu
Menu Item Options
RTC Lock Enabled / Disabled
BIOS Lock Enabled / Disabled
4.3.4.5 PCI Express configuration submenu
Menu Item
PCI Express Port 1 (Int. LAN1 on CN27)
PCI Express Port 2 (Int. LAN2 on CN26)
PCI Express Port 3 (M.2 CN16)
4.3.4.5.1 PCI Express Root Port #x configuration submenus
Menu Item
PCI Express Root Port #1
PCI Express Root Port #2
PCI Express Root Port #3
PCI Express Speed

4.3.5 ACPI Table/features submenu

Menu Item
FACP - RTC S4 wakeup
FACP - Preferred PM Profile
DSDT - ACPI S3 Support
DSDT - ACPI S4 Support
WDAT/WDRT - TCO Watchdog Support
SBC-A80-eNUC
SBC-A80-eNUC User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G Copyright © 2017 SECO S.r.l.
Description
When Enabled, bytes 38h-3F8h in the lower/upper 128-byte bank of RTC RAM will be locked.
Enable or disable BIOS SPI region write protect.
Options Description
See submenu
Options
Disabled / Enabled
Auto / Gen1 / Gen2
Options
Enabled / Disabled
Auto / Desktop / Mobile
Enabled / Disabled
Enabled / Disabled
Enabled / Disabled
Description
Enable or Disable single PCI Express Root Port #x.
PCI Express Root Port #1 ÷ #2 are internally connected to Intel
I210. Disabling this port will result in disabling corresponding Ethernet interfaces.
Set PCI-e ports link speed/capability.
Description
Enable or disable FACP (Fixed ACPI Description Table) support for S4 wakeup from RTC
This Option sets the preferred power management profile in ACPI Fixed ACPI Description Table
Enable or disable DSDT (Differentiated System Description Table) support for ACPI S3 State
Enable or disable DSDT (Differentiated System Description Table) support for ACPI S4 State
Enable or disable the TCO Watchdog Support
®
Gigabit Ethernet Controllers
47