Accessories - Seco SBC Series User Manual

5.2 Accessories

SECO can offer various accessories in completion of SBC-A80-eNUC functionalities
5.2.1 Accessories kit CABKITA80
Connection cable CV-837/30 is needed for audio functionalities; it is not used with SBC-A80-eNUC board.
Connection cable CV-836/30 is needed for connection of power and reset pushbuttons and SATA / power LEDs; it has to be connected to SBC-A80-eNUC board's connector
CN18 and to V995 module's connector CN1.

Serial adapter cable CV-904/20. It can be used to carry out the signals of RS-232/RS-422/RS-485 signals available on the connector CN8 to two standard DB-9 male
connectors.

SATA power cable, for connection of power rails of external SATA disks / SSDs to internal SATA power connector CN29.

Speaker connection cable, for the connection of external 8Ω Speaker (not part of the cable itself)
SBC-A80-eNUC
SBC-A80-eNUC User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G Copyright © 2017 SECO S.r.l.
This accessories kit includes the following items

Dual USB 2.0 Type A adapter with standard PC mounting plate
ports #2-#3 (connector CN11) to standard USB 2.0 Type A receptacles

Front Panel I/O board V995, which allows the integration on a panel of an optional enclosure of two Audio jacks
(Earphone and Mic in), Reset Button, Power button and two LED (for SATA activity and Power Status of the board itself).
For fixing of the front panel I/O board to the external enclosure's panel, the module is equipped with two brackets and screws for
the fixing of the brackets to the module.

Cables for connection of the Front Panel I/O board to SBC-A80-eNUC board.
. Can be used to carry out the signals of internal USB
61