Seco SBC Series User Manual page 44

SERPENT Mode
PR3 Disabled / Enabled
Unsolicited Attack Override Disabled / Enabled
GTT Size 2MB / 4MB / 8MB
Aperture Size 128MB / 256MB / 512MB
32M / 64M / 96M / 128M /
160M / 192M / 224M / 256M /
IGD - DVMT Pre-Allocated
288M / 320M / 352M / 384M /
416M / 448M / 480M / 512M
128M / 256M / MAX
IGD - DVMT Total Gfx Mem
IGD Turbo Auto / Enabled / Disabled
Power Meter Lock Disabled / Enabled
WOPCMSZ 1MB / 2MB / 4MB / 8MB
PWM-Normal
Backlight Control Mode
PWM-Inverted
Force Backlight VDD Disabled / Enabled
SBC-A80-eNUC
SBC-A80-eNUC User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G Copyright © 2017 SECO S.r.l.
When not disabled, it is possible to choose between LITE encryption and SERPENT encryption modes.
Enable / Disable PAVP PR3 mode
Enable / Disable PAVP Unsolicited Attack Override
Select the GTT (Graphics Translation Table) Size
Use this item to set the total size of Memory that must be left to the GFX Engine
Select DVMT5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphic Device
Select the size of DVMT (Dynamic Video Memory) 5.0 that the Internal Graphics Device will use
Enable or Disable IGD Turbo mode
Enable or disable the Power Meter lock Functionality
Select a size for WOPCM
This option allows selecting if PWM control of the backlight must be with normal or inverted polarity.
When Enabled, the panel backlight is forced to on
44