Seco SBC Series User Manual page 2

REVISION HISTORY
Revision Date
th
1.0 8 April 2016
th
1.1 19 October 2016
th
1.2 15 March 2017
All rights reserved. All information contained in this manual is proprietary and confide ntial material of SECO S.r.l.
Unauthorized use, duplication, modification or disclosure of the information to a third-party by any means without prior consent of SECO S.r.l. is prohibited.
Every effort has been made to ensure the accuracy of this manual. However, SECO S.r.l. accepts no responsibility for any inaccuracies, errors or omissions herein.
SECO S.r.l. reserves the right to change precise specifications without prior notice to supply the best product possible.
Some of the information found in the BIOS SETUP Chapter has been extracted from the following copyrighted Insyde Software Corp. documents:
InsydeH2O Setup Utility - User Reference Guide
The above mentioned documents are copyright © 2008 Insyde Software Corp. All rights reserved.
For further information on this module or other SECO products, but also to get the required assistance for any and possible issues, please contact us using the
dedicated web form available at http://www.seco.com (registration required).
Our team is ready to assist.
SBC-A80-eNUC
SBC-A80-eNUC User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G Copyright © 2017 SECO S.r.l.
Note
First Official Release.
Updated to rev. C of the PCB:
- M.2_ALERT# signal on connector CN16 added
- GPI/O Connector added
- Paragraph 3.3.16 title corrected
BIOS Section updated
Ref
SB
SB
SB
2