Introduction - Seco SBC Series User Manual

3.1 Introduction

On SBC-A80-eNUC board, there are several connectors located on the upper plane. Standard connectors are placed on the same side of PCB, so that it is
possible to place them on a panel of an eventual enclosure.
Please be aware that, depending on the configuration purchased, the appearance of the board could be slightly different from the following pictures.
TOP SIDE
GPI/O
connector
eDP connector
T/S connector
FAN connector
SBC-A80-eNUC
SBC-A80-eNUC User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G Copyright © 2017 SECO S.r.l.
DC In Power
miniDP++
Jack
DC In MicroFit
Connector
DDR3L SO-
DIMM Slots
Cabled RTC
USB 2.0 Port
battery
#2 #3
μSD slot
IR receiver
Drive Power SATA 7p F
BOTTOM SIDE
USB 3.0 Port HDMI Gigabit Ethernet
#0 Connector port #1
Gigabit Ethernet
port #0
M.2 SSD Socket
2 (Key B Type
2260 / 2242)
M.2 Connectivity
Socket 1 (Key E
Type 2230)
MFG connector
Multistandard
COM ports pin
Button/LED
USB 3.0 Port Speaker internal Combo TRRS
#1 header Audio jack
header
header
21