Seco SBC Series User Manual page 50

4.3.7.1 PCI HS_UART 0:30:x submenus
Menu Item
Port Enabled
UseGlobalSetting
Terminal Type
Baud rate
Data Bits
Parity
Stop Bits
Flow Control
SBC-A80-eNUC
SBC-A80-eNUC User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: S.B. - Reviewed by G.G Copyright © 2017 SECO S.r.l.
Options Description
Disabled / Enabled Enable or Disable single PCI HS_UART Port #x.
When this item is enabled, the corresponding HS_UART will use the global settings.
Disabled / Enabled
Otherwise, it will be possible to set individually the following items
VT_100 / VT_100+ / VT_UTF8 /
Set HS_UART #x terminal type
PC_ANSI
115200 / 57600 / 38400 /
19200 / 9600 / 4800 / 2400 / Set HS_UART #x baud rate
1200
7 bits / 8 bits Set HS_UART #x data bits
None / Even / Odd Set HS_UART #x parity bits
1 bit / 2 bits Set HS_UART #x stop bits
None
RTS/CTS Set HS_UART #x flow control type
XON/XOFF
50