To Use The Prtdiag Command To Identify Memory Size - Sun Microsystems SPARC Enterprise M8000 Product Notes

XSCF>
The following example shows a display of the showdevices -d command,
where 0 is the domain_id.
showdevices -d 0
XSCF>
...
Memory:
-------
board
DID XSB mem MB
01 00-0 65536
01 03-0 16384
01 03-1 16384
01 03-2 16384
01 03-3 16384
...
This example shows that 00-0 has 64 Gbytes of memory while the other system
boards have 16 Gbytes.
▼ To Use the prtdiag Command to Identify Memory
Size
●
On the domain, execute the prtdiag command.
prtdiag
#
The following example shows a display of the prtdiag command.
24 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1071 • July 2008
-d domain_id
showdevices
perm base
mem MB address
0 0x0000004000000000
7384 0x0000034000000000
0 0x0000030000000000
0 0x000002c000000000
0 0x0000028000000000
domain target deleted remaining
mem MB XSB mem MB
260288
260288
260288
260288
260288
mem MB