Sun Microsystems SPARC Enterprise M8000 Product Notes page 33

Solaris OS Issues and Workarounds Fixed in Solaris 10 8/07 (2 of 2)
TABLE 7
CR ID Description
6510861 When using the PCIe Dual-Port Ultra320 SCSI
controller card (SG-(X)PCIE2SCSIU320Z), a
PCIe correctable error causes a Solaris panic.
6520990 When a domain reboots, SCF might not be able
to service other domains that share the same
physical board. DR operation can exceed the
default timeout period and panic can occur.
6527781 The cfgadm command fails while moving the
DVD/DAT drive between two domains.
6530178 DR addboard command can hang. Once the
problem is observed, further DR operations
are blocked. Recovery requires reboot of the
domain.
6534471 Systems might panic/trap during normal
operation.
6539084 There is a low probability of a domain panic
during reboot when the Sun Quad GbE UTP x8
PCIe (X4447A-Z) card is present in a domain.
6539909 Do not use the following I/O cards for
network access when you are using the boot
net install command to install the Solaris
OS:
• X4447A-Z/X4447A-Z, PCIe Quad-port
Gigabit Ethernet Adapter UTP
• X1027A-Z/X1027A-Z, PCIe Dual 10 Gigabit
Ethernet Fiber XFP
Workaround
Add the following entry to /etc/system to
prevent the problem:
set pcie:pcie_aer_ce_mask = 0x31c1
Increase the DR timeout period by setting the
following statement in /etc/system and
reboot your system.:
set drmach:fmem_timeout = 30
There is no workaround. To reconfigure
DVD/Tape drive, execute reboot -r from the
domain exhibiting the problem.
There is no workaround.
Make sure you have the correct /etc/system
parameter and reboot the system:
set heaplp_use_stlb=0
A fix is available in patch 125670-01.
Use an alternative type of network card or
onboard network device to install the Solaris OS
via the network.
Sun SPARC Enterprise M8000/M9000 Servers Product Notes 19