Avaya IX Room Systems XT Series Release Notes page 35

© 2019 Avaya Inc. All rights reserved
Advanced Remote-Control Shortcuts
Advanced Remote Control
•
The 'pip' key on the Advanced Remote Control controls the number and the layout of visible
windows on the screen. For instance, you can choose to see the remote video in a big window
and your local video in a smaller window on the upper left corner. This corresponds to the
'layouts' key on the Simplified Remote Control.
•
The 'layouts' key on the Remote Control controls the content of the visible windows on the
screen. For instance, you can decide to see the remote video or the local video on the bigger
window. This corresponds to holding the 'layouts' key on the Simplified Remote Control.
•
The 'C' key corresponds to the 'del' key on the Simplified Remote Control (described in next
section).
•
Press and hold the 'C' key to completely erase field content in the GUI.
•
To quickly move the current camera when you are in the Main menu, press the 'C' or 'back' key
on the remote control. Press 'C' again to access the Main menu.
•
During a call the title bar and the call page disappear after a few seconds. The header is
automatically reactivated when mute/privacy/DND is activated. You can hide or access the title
bar and call menu by pressing the 'C' key on the Remote-Control Unit. From the Main menu, you
can also press the 'back' key on the Remote Control.
•
To customize the use of the Advanced Remote-Control Unit, press together the 'red' and 'green'
keys on the Remote-Control Unit, then press the relevant digit keys to type a two-digit code
(from 01 to 96 to control the Codec Unit). The default code is 01. The code programmed in the
Remote-Control Unit must match the setting configured in the GUI Configure > General >
Remote Control Code or in the Web > Basic Settings > General > Remote Control Code. Codes
97, 98, 99 are reserved to control an Avaya XT Series Deluxe Camera and cannot be used to
control the Codec Unit.
•
To switch between controlling the local and remote camera, press 'far' or 'near'. When the 'far'
icon appears, all input selection, presets, camera movements and zoom actions are directed to
the far camera. In a meeting, the actions are directed to the current far active speaker.
•
You can press the 'inputs' key to quickly zap between the available local or far cameras
•
To check the call status and diagnostics during a call, press the 'help' key on the Remote
Control.
•
Press and hold the 'privacy' key to toggle Do Not Disturb. Press and hold the 'mute' key to
toggle 'privacy'
•
When connected to a Solution Meeting, press 'far' and then 'layouts' key to cycle among the
supported Meeting layouts
•
You can press the 'ok/menu' key to quickly toggle the input editing mode of the Remote Control
between numeric-only/lowercase letters and digits/uppercase letters and digits.
•
In the Call page, press and hold 'ok/menu' to toggle the input editing mode, and press 'ok/menu'
to place a call.
•
In XTE240, used as personal or shared endpoint, you can press and hold 'inputs' to toggle
between your pc and the remote content, when receiving a presentation.
•
To access and save camera positions, press 'presets memo' or 'presets select'.
•
You can store and recall up to 122 presets. Presets selection is supported as follows:
Release Notes for Avaya XT Series
−
Presets from 00 to 99: pressing 'memo'/'select' then the two digits of the
preset number
−
Presets from 100 to 109: pressing 'memo'/'select' then * and 0/9
−
Presets from 110 to 119: pressing 'memo'/'select' then # and 0/9
−
Preset 120 pressing: 'memo'/'select' then # and *
−
Preset 121 pressing: 'memo'/'select' then # and #
−
The two digits must be pressed quickly in sequence
Common Remote-Control Shortcuts | 35