© 2019 Avaya Inc. All rights reserved
Easy to Start Sequence – Personal Credentials Required
Easy to Start Sequence – Configuration Completed
Important
Cloud Management and Auto-Provisioning
The input of a numeric code at the first start-up allows configuring your endpoint automatically with
a pre-provisioned profile created by your IT Administrator using Avaya Equinox® Management
available as part of Equinox Solution 9.0.0 or higher.
When using an Avaya IX video endpoint in a company where Avaya Equinox® Management is
available, the administrator can now enable the Auto-Provisioning feature in the Avaya Equinox®
Management Settings.
Auto-Provisioning an endpoint means to define a set of parameters for it in Avaya Equinox®
Management, even before it is connected to the network (at home or in the company premises),
and have the endpoint get these parameters automatically from Avaya Equinox® Management at
first start-up. Once provisioned, the endpoint will be managed by the Avaya Equinox®
Management, which can change the endpoint configurations and preferences at any time.
Release Notes for Avaya XT Series
•
Once completed, your endpoint will receive the SIP configuration and some other
settings from the configuration server auto-discovered with this procedure.
•
Only SIP parameters are configured by this procedure in this release.
•
If you want to see your Exchange Calendar on the endpoint, you need to configure it
separately in this release. See Integration with Microsoft Exchange Calendar.
What's New | 13