Avaya IX Room Systems XT Series Release Notes page 16

© 2019 Avaya Inc. All rights reserved
Important
Post-Provisioning an Endpoint
If you don't have the code for a specific endpoint, because it has not yet been provisioned in
Avaya Equinox® Management, you can insert the Server Service Code of your Avaya Equinox®
Management, and leave the Endpoint Service Code digits empty or all zeroes (post-provisioning
code). This feature is called Post-Provisioning. In this case the Avaya Equinox® Management
Admin will be notified that an endpoint, not yet provisioned, has been added to the list of the
manageable endpoints and can be configured any time later.
This way, an IT administrator can plug all the endpoints in all the company conferencing rooms,
just inserting the same post provisioning code; then set a mnemonic name for the endpoint and
configure it later in Avaya Equinox® Management, where it will be displayed with a red clock icon
near the name.
You can then specify a set of basic/advanced settings for an endpoint or delete the endpoint if you
don't want to provision it any longer.
Post-provisioned Endpoint Listed
Auto Provisioning FAQ
[Q]What is the default for Auto-provisioning in Avaya IX video endpoints?
[A]The default depends on the installation of the endpoint and if it was already managed by an
Avaya Equinox® Management entity. If the endpoint is a newly installed endpoint or it was not
managed, the default will be "Cloud"; otherwise it will be "Local". The Local Mode will be
automatically changed to "Cloud" when the Avaya Equinox® Management entity managing the
endpoint is updated to solution release 9.0, if Auto-Provisioning is enabled.
[Q]How to check if my endpoint is managed through the cloud or not?
[A]Check Configure>Advanced>Utilities>Remote Access>Avaya Equinox® Management
If the connection Mode is "Cloud", your endpoint is connected to Avaya Equinox® Management
using a secure web socket. Status of the connection is visible in the endpoint Web home page or
in System Status> More.
Release Notes for Avaya XT Series
•
Once your endpoint has been successfully provisioned, the Avaya Equinox®
Management mode will be marked as "Cloud"
•
When managed in "Cloud mode", the endpoint is connected using a secure web
socket to Avaya Equinox® Management for services like configuration, LDAP
entries, software upgrade, scheduling and meeting management (meeting roster and
similar features).
•
Mode: Cloud (Connection using auto-provisioning)/ Local (Connection to Scopia
Management 8.3 version or earlier, or Endpoint Auto-provisioning not enabled in
Equinox Management)
What's New | 16