Avaya IX Room Systems XT Series Release Notes page 14

© 2019 Avaya Inc. All rights reserved
Avaya Equinox® Management with Auto-Provisioning Server Code
In this way the administrator can easily configure a provisioning profile for any Avaya IX endpoint
even before it is installed. No manual configuration is required on the endpoint for common
parameters.
Pre-Provisioning an Avaya IX Endpoint
To define a pre-provisioning parameter for an endpoint, click on the Add button in the Avaya
Equinox® Management Endpoints tab, and choose Pre-Provisioning an Endpoint.
Add a Pre-Provisioned Endpoint
A Service Code corresponding to the pre-provisioned endpoint profile is generated.
You can then specify a set of basic/advanced settings for an endpoint.
Release Notes for Avaya XT Series
Important
•
This feature will be supported for an endpoint installed in any location, provided that
an Avaya Equinox® Management compatible version is available for association with
the endpoint, that the Auto-provisioning Endpoint feature is enabled on Avaya
Equinox® Management, that the endpoint is connected to the Internet and that your
DHCP server is able to assign a valid DNS address to the endpoint.
•
Please refer to Avaya Equinox® Management documentation for further details
about configuring this feature.
Important
•
The endpoint Auto-Provisioning Service may be interrupted, including for
maintenance, repairs, upgrades, or equipment or network failures. We may
discontinue certain features and the support for certain video devices at any time.
Events beyond our control may affect our service, such as force majeure events.
What's New | 14