Protecting Memory Card Files - Nortel 8000 Series Installing And Maintaining

2
Protecting memory card files
Nortel ships each memory card with the read-write protect switch in the
unprotected position. After you successfully load the configuration file and
save your configuration, you can write-protect the memory card for backup
purposes.
Typically, you do not operate a Nortel Ethernet Routing Switch 8600 with a
write-protected memory card. Make a copy of your configuration on another
memory card, write-protect the second card, and store it in a safe place. If
you do not use a second memory card, you can copy your configuration to a
File Transfer Protocol (FTP) or Trivial FTP (TFTP) server.
Procedure steps
Step
1
2
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2008, Nortel Networks
.
Removing a flash memory card: 8010, 8006, 8003 chassis
Pull the flash memory card out of the card receptacle.
Action
To remove the card, press the eject button above the memory card
receptacle.
Pull the card out of the card receptacle.
Nortel Ethernet Routing Switch 8600
NN46205-303 01.02 Standard
4.1 10 January 2008
Protecting memory card files 73
—End—