Nortel 8000 Series Installing
Installing a fan tray in an ethernet routing switch chassis
Hide thumbs
Also See for 8000 Series:
- Reference manual (252 pages) ,
- Quick start manual (32 pages) ,
- Installing and maintaining (108 pages)
Advertisement
Quick Links
Installing a Fan Tray in an Ethernet Routing Switch 8000
This document describes how to replace a fan tray in an Ethernet Routing Switch 8000 Series
Chassis.
How to get help
This chapter explains how to get help for Nortel products and services.
Finding the latest updates on the Nortel web site
The content of this documentation was current at the time the product was released.
To check for updates to the latest documentation and software for Ethernet Routing
Switch, click one of the following links:
Link to
Latest software
Latest documentation
Getting help from the Nortel web site
The best way to get technical support for Nortel products is from the Nortel
Technical Support web site:
www.nortel.com/support
Series Chassis
Takes you directly to the
Nortel page for Ethernet Routing Switch
software located at:
www130.nortelnetworks.com/cgi-bin/eserv/cs/
main.jsp?cscat=SOFTWARE&resetFilter=1&tran
Product=9015
Nortel page for Ethernet Routing Switch
documentation located at:
www130.nortelnetworks.com/cgi-bin/eserv/cs/
main.jsp?cscat=DOCUMENTATION&resetFilter=
1&tranProduct=9015
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Nortel 8000 Series
Summary of Contents for Nortel 8000 Series
- Page 1 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis This document describes how to replace a fan tray in an Ethernet Routing Switch 8000 Series Chassis. How to get help This chapter explains how to get help for Nortel products and services.
-
Page 2: Getting Help Over The Phone From A Nortel Solutions Center
Getting help over the phone from a Nortel Solutions Center If you do not find the information you require on the Nortel Technical Support web site, and you have a Nortel support contract, you can also get help over the phone from a Nortel Solutions Center. - Page 3 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis Replacing the fan tray in an 8003 Chassis The 8003 Chassis has a single fan tray that is installed on the right side of the chassis (Figure 1). The fan tray contains three high-capacity, multiple-speed fans and a control or monitor circuit board.
- Page 4 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis To replace the fan tray: Loosen the two retaining screws that fasten the fan tray to the chassis (Figure Figure 2 Removing the fan tray from an 8003 Chassis...
- Page 5 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis Tighten the captive screws to fasten the fan tray to the chassis (Figure With the chassis power on, verify that the green status LED is lit. Replacing a fan tray in an 8006 or 8010 Chassis Figure 4 illustrates the fan tray used in the 8006 Chassis.
- Page 6 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis Figure 5 Fan tray for the 8010 chassis F a n Fa n 553-AAA2639 Table 1 describes the LED on the fan trays. Table 1 Fan tray LED...
- Page 7 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis To replace a fan tray: Loosen the two retaining screws that fasten the fan tray to the chassis (Figure Figure 6 Removing a fan tray from an 8006 or 8010 Chassis...
- Page 8 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis Figure 7 Installing a fan tray in an 8006 or 8010 Chassis 9591FA Tighten the captive screws to fasten the fan tray to the chassis (Figure With the chassis power on, verify that the green status LED is lit.
- Page 9 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis Table 2 describes the fan tray LEDs on the 8010co Chassis. Table 2 Fan tray LEDs on the 8010co Chassis Label Color State Meaning Fail Steady One of the fans has failed.
- Page 10 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis Figure 9 Connecting the wrist strap jack to the front ground port Fa il Pa ss Fa il Pa ss 10230FA Turn the fan tray lock to the unlocked position (Figure 10).
- Page 11 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis Figure 10 Unlocking a fan tray on the 8010co Chassis 1 = Unlocked 2 = Locked Fa il Pa ss Fa il Pa ss 10362FA Press up on the inside of the handle to disengage it from the chassis back panel, then pull the fan tray part way out of the chassis.
- Page 12 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis Figure 11 Removing a fan tray from a 8010co Chassis Fa il Pa ss Fa il Pa ss Fa il Pa ss 10279FA Slide the new fan tray into the chassis until the connectors at the rear of the fan tray engage (Figure 12).
- Page 13 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis Figure 12 Installing a fan tray in a 8010co Chassis Fa il Pa ss Fa il Pa ss Fa il Pa ss 10280FA Turn the fan tray lock to the locked position (see Figure 10 on page 11).
- Page 14 Installing a Fan Tray in an Ethernet Routing Switch 8000 Series Chassis 312752-E Rev 00...
Need help?
Do you have a question about the 8000 Series and is the answer not in the manual?
Questions and answers