Nortel 8000 Series Installing And Maintaining page 12

12 Introduction
BSMI statement for 8010, 8006 and 8003 chassis (Taiwan only)
This is a Class A product based on the standard of the Bureau of Standards,
Metrology and Inspection (BSMI) CNS 13438, Class A.
MIC notice for 8010, 8006, 8003 chassis (Republic of Korea only)
This device has been approved for use in Business applications only per
the Class A requirements of the Republic of Korea Ministry of Information
and Communications (MIC). This device may not be sold for use in a
non-business application.
National safety statements of compliance
CE marking statement (Europe only)
EN 60 950 statement This is to certify that the Nortel Networks 8000
Series chassis and components installed within the chassis are in
compliance with the requirements of EN 60 950 in accordance with the Low
Voltage Directive. Additional national differences for all European Union
countries have been evaluated for compliance. Some components installed
within the 8000 Series chassis may use a nickel-metal hydride (NiMH)
and/or lithium-ion battery. The NiMH and lithium-ion batteries are long-life
batteries, and it is very possible that you will never need to replace them.
However, should you need to replace them, refer to the individual component
manual for directions on replacement and disposal of the battery.
NOM statement 8010, 8006, and 8003 chassis (Mexico only)
The following information is provided on the devices described in this
document in compliance with the safety requirements of the Norma Oficial
Méxicana (NOM):
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2008, Nortel Networks
.
Nortel Ethernet Routing Switch 8600
NN46205-303 01.02 Standard
4.1 10 January 2008