Site Requirements; 8010, 8006, And 8003 Chassis - Nortel 8000 Series Installing And Maintaining

Ethernet routing switch
Hide thumbs Also See for 8000 Series:
Table of Contents

Advertisement

26 Chassis installation fundamentals
Chassis
8010
8006
8003
A control or monitor circuit board in the fan tray reports temperature and the
status of fan operation to the network management software. A green light
emitting diode (LED) indicates correct fan operation.
For fan installation instructions, see Installing a Fan Tray in an Ethernet
Routing Switch 8000 Series Chassis (312752-E).

Site requirements

Ensure that the installation site meets the space, electrical, and
environmental requirements listed in this section. See
specifications" (page 85)

8010, 8006, and 8003 chassis

The following sections include the site requirements for the 8010, 8006,
and 8003 chassis.
Space requirements
The installation site must provide sufficient free space around the chassis
to ensure proper ventilation and service access.
Use the following guidelines to plan front and rear access:
AC input electrical requirements
For information about specifications for the power supply, see
specifications" (page
For AC input power specifications for each of the modules, see Installing
an AC Power Supply in an Ethernet Routing Switch 8000 Series Chassis
(NN46205-306; 312751-E).
DC input electrical requirements (8010 and 8006 chassis)
The installation site must meet the electrical requirements for DC power as
shown in
additional electrical requirements, see
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2008, Nortel Networks
.
Fan tray
Two fan trays—each fan tray uses eight high-capacity fans
One fan tray with six high-capacity fans
One fan tray with three high-capacity fans
The maintenance aisle in front of the frame requires a clearance of
76.2 cm (30 inches).
The wiring aisle at the back of the frame requires a clearance of 61 cm
(24 inches).
85).
Table 2 "Electrical requirements for the DC models" (page
Nortel Ethernet Routing Switch 8600
NN46205-303 01.02 Standard
4.1 10 January 2008
for more information.
"Technical specifications" (page
"Technical
"Technical
27). For
85).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8010co800380068010

Table of Contents